Bosch DSA E-Series (E2700) Installation Manual page 57

DSA E-Series (E2700)
1 Drive power
2 Drive service
action required
3 Drive service
action allowed
Drive State Represented by LEDs
Drive state
Power is not applied.
Normal operation –The power is turned on, but drive
I/O activity is not occurring.
Normal operation –Drive I/O activity is occurring.
Service action required –A fault condition exists, and
the drive is offline.
LEDs on the Controller Canister Main Faceplate
Location LED
1 Ethernet
connector 1 link
2 Ethernet
connector 1 link
3 Ethernet
connector 2 link
4 Ethernet
connector 2 link
Bosch Sicherheitssysteme GmbH
Turning on the power and checking for problems in an E2700 controller-drive tray configuration | en
Green
Amber
Blue
3 4
9 10 11
Color
Green
Green
Green
Green
The power is turned
on and the drive is
operating normally.
An error has
occurred.
The drive canister can
be removed safely
from the controller-
drive tray.
Drive power LED
(green)
Off
On
Blinking
On
5 6
12 13 14
On
There is a 1000 Gb/s rate.
The link is up (LED blinks
when there is activity).
There is a 1000 Gb/s rate.
The link is up (the LED blinks
when there is activity).
Installation manual
Drive I/O activity The power is turned
is taking place. off.
Normal status.
The drive canister
cannot be removed
safely from the
controller-drive tray.
Drive service action required
LED
(amber)
Off
Off
Off
Off
7 8
49006-15
Off
There is a 10BASE-T rate.
The link is not active.
There is a 10BASE-T rate.
The link is not active.
57
2015.10 | V2 | DOC