Bosch DSA E-Series (E2700) Installation Manual page 59

DSA E-Series (E2700)
LEDs on the controller canister iSCSI host interface card sub plates
Location LED
1 Host interface card
channel 3 link
status
2 Host interface card
channel 3 link
activity
3 Host interface card
channel 3 link
status
4 Host interface card
channel 3 link
activity
* You can also have a two-port iSCSI HIC.
LEDs on the power-fan canister
Location LED
1 Standby power
2 Power-fan DC
power
3 Power-fan service
action allowed
4 Power-fan service
action required
Bosch Sicherheitssysteme GmbH
Turning on the power and checking for problems in an E2700 controller-drive tray configuration | en
Color
Green The link has auto-
negotiated to 10
Gb/s.
Green The link is up and
there is no activity.
Green The link has auto-
negotiated to 10
Gb/s.
Green The link is up and
there is no activity.
DC
!
1 2 3 4 5
Color
Green
Green
Blue
Amber
On
The link has auto-
negotiated to 1 Gb/s.
The link is not active.
The link has auto-
negotiated to 1 Gb/s.
The link is not active.
AC
On
The controller-drive tray is
in Standby mode, and DC
power is not available.
DC power from the power-
fan canister is available.
The power-fan canister can
be removed safely from the
controller-drive tray.
A fault exists within the
power-fan canister.
Installation manual
Off Blinking
The link is in the
process of being
acquired.
The link is active.
The link is in the
process of being
acquired.
The link is active.
97003-01
Off
The controller-drive tray is not
in Standby mode, and DC
power is available.
DC power from the power-fan
canister is not available.
The power-fan canister cannot
be removed safely from the
controller-drive tray.
Normal status.
59
2015.10 | V2 | DOC