Procedure - Connecting The Controller-Drive Tray To The Expansion Drive Trays - Bosch DSA E-Series (E2700) Installation Manual

DSA E-Series (E2700)
7.4 Procedure – connecting the controller-drive tray to the
expansion drive trays
The DSA E‑Series expansion drive trays are shipped with the appropriate number of SAS
cables.
The following figures show valid host-to--controller-drive tray configurations when using an
E2700 controller- drive tray.
One expansion drive tray (simplex controller configuration)
One expansion drive tray (dual simplex controller configuration)
(recommended cabling for maximum throughput)
Two expansion drive trays (dual simplex controller configuration)
Bosch Sicherheitssysteme GmbH
Connecting the E2700 controller-drive tray to the hosts | en
Installation manual
29
2015.10 | V2 | DOC