40
en | Installing the drive trays for the E2700 controller-drive tray configurations
4.
5.
2015.10 | V2 | DOC
1
2
With the help of at least two other persons, remove the drive tray and all of the contents
from the shipping carton, using the four drive tray handles (two to a side) as shown in the
following figure. Set the drive tray aside.
Position the mounting rails in the cabinet.
–
If you are installing the mounting rails above an existing tray, position the mounting
rails directly above the tray.
–
If you are installing the mounting rails below an existing tray, allow 17.8 cm (7 in.)
vertical clearance.
1
2
2
1
Installation manual
DSA E-Series (E2700)
92015-00
2
1
92015-02
Bosch Sicherheitssysteme GmbH