Routine Maintenance - Emerson Affinity User Manual

Safety Product Mechanical
Information Information Installation
3.11

Routine maintenance

The standard drive should be installed in a cool, clean, well ventilated
location. Contact of moisture and dust with the drive should be
prevented.
The E12/E54 drive is protected from airborne dust and splashing water.
The E12/E66 drive is protected from any dust ingress and deckwater.
Regular checks of the following should be carried out to ensure drive /
installation reliability are maximized:
Environment
Ensure the standard enclosure temperature
Ambient temperature
remains at or below maximum specified.
Ensure the standard drive remains dust free –
check that the heatsink and drive fan are not
Dust
gathering dust. The lifetime of the fan is
reduced in dusty environments.
Ensure the drive enclosure shows no signs of
Moisture
condensation.
Enclosure
Enclosure door Ensure filters are not blocked and that air is free
filters to flow.
E12/E54 drive cover Replace filters regularly, at least every 3
filters (size 4 to 6 months. In some environments a filter change
only) may be required more frequently.
Ensure that all seals are correctly located and
E12/E54 drive cover
not damaged.
Ensure that all seals are correctly located and
E12/E66 drive cover
not damaged.
Electrical
Screw connections Ensure all screw terminals remain tight.
Ensure all crimp terminals remains tight –
Crimp terminals check for any discoloration which could indicate
overheating.
Cables Check all cables for signs of damage.
Affinity User Guide
Issue Number: 5
Electrical Getting Basic Running
Installation Started parameters the motor
www.controltechniques.com
SMARTCARD
Optimization PC tools
operation
Advanced Technical
Diagnostics
parameters Data
UL Listing
Information
63