Emerson Affinity User Manual page 5

Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
BA1201 BA1202 BA1203
BA2201 BA2202 BA2203
BA3201 BA3202
BA4201 BA4202 BA4203
BA5201 BA5202
BA1401 BA1402 BA1403
BA2401 BA2402 BA2403
BA3401 BA3402 BA3403
BA4401 BA4402 BA4403
BA5401 BA5402
BA3501 BA3502 BA3503
BA3507
BA4601 BA4602 BA4603
BA5601 BA5602
The AC variable speed drive products listed above have been designed
and manufactured in accordance with the following European
harmonized standards:
Adjustable speed electrical power drive
EN 61800-5-1:2007 systems - safety requirements - electrical,
thermal and energy
Adjustable speed electrical power drive
EN 61800-3:2004 systems. EMC product standard including
specific test methods
Electromagnetic compatibility (EMC).
EN 61000-6-2:2005 Generic standards. Immunity standard for
industrial environments
Electromagnetic compatibility (EMC).
EN 61000-6-4:2007 Generic standards. Emission standard for
industrial environments
Affinity User Guide
Issue Number: 5
Declaration of Conformity (Size 1 to 5)
BA1204
BA1404 BA1405 BA1406
BA3504 BA3505 BA3506
BA4604 BA4605 BA4606
www.controltechniques.com
These products comply with the Low Voltage Directive 2006/95/EC and
the Electromagnetic Compatibility Directive 2004/108/EC.
T.Alexander
Vice President, Technology
Newtown
Date: 14th July 2009
These electronic drive products are intended to be used with
appropriate motors, controllers, electrical protection components
and other equipment to form complete end products or systems.
Compliance with safety and EMC regulations depends upon
installing and configuring drives correctly, including using the
specified input filters. The drives must be installed only by
professional assemblers who are familiar with requirements for
safety and EMC. The assembler is responsible for ensuring that the
end product or system complies with all the relevant laws in the
country where it is to be used. Refer to the User Guide. An EMC
Data Sheet is also available giving detailed EMC information.
5