Emerson Affinity User Manual page 6

Safety Product Mechanical
Information Information Installation
Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
BA6401 BA6402
BA6601 BA6602
The AC variable speed drive products listed above have been designed
and manufactured in accordance with the following European
harmonized standards:
Adjustable speed electrical power drive
EN 61800-5-1:2007 systems - safety requirements - electrical,
thermal and energy
Adjustable speed electrical power drive
EN 61800-3:2004 systems. EMC product standard including
specific test methods
Electromagnetic compatibility (EMC). Generic
EN 61000-6-2:2005 standards. Immunity standard for industrial
environments
6
Electrical Getting Basic Running
Installation Started parameters the motor
Declaration of Conformity (Size 6)
www.controltechniques.com
SMARTCARD
Optimization PC tools
operation
These products comply with the Low Voltage Directive 2006/95/EC and
the Electromagnetic Compatibility Directive 2004/108/EC.
T.Alexander
Vice President, Technology
Newtown
Date: 14th July 2009
These electronic drive products are intended to be used with
appropriate motors, controllers, electrical protection components
and other equipment to form complete end products or systems.
Compliance with safety and EMC regulations depends upon
installing and configuring drives correctly, including using the
specified input filters. The drives must be installed only by
professional assemblers who are familiar with requirements for
safety and EMC. The assembler is responsible for ensuring that the
end product or system complies with all the relevant laws in the
country where it is to be used. Refer to the User Guide. An EMC
Data Sheet is also available giving detailed EMC information.
Advanced Technical
Diagnostics
parameters Data
Affinity User Guide
Issue Number: 5
UL Listing
Information