Parts Identification - SATO TH2 Series Operator's Manual

1.3 PARTS IDENTIFICATION

Front view
1
2
3
4
5
6
7
LCD panel
1
Display the operator menus, printer status,
selections for settings and error message. The
LCD panel can be tilted to an angle which is
most comfortable for the user's view.
CHARGE indicator
2
It turns on when the optional battery pack is
charging. It turns off when the battery pack is
fully charged or no battery pack is in the
printer.
Power button
3
Press and hold for one second to turn on the
power.
Press and hold for three seconds to turn off the
power.
TH2 Series Operator Manual
Top cover
4
Open this cover to load the media.
Operator panel
5
It consists of alpha-numeric keypad, arrow
buttons and other functional buttons. Please
refer to Section 3.1 Operator Panel, for
details of individual buttons.
Media ejection slot
6
Opening for media output.
Cover open/close latch
7
Push the latch on the right side of the printer
downward to open the top cover of the printer.
To close top cover, push down firmly on left
and right side of top cover until click sound is
heard. Make sure top cover is closed properly
to ensure proper feeding and printing of labels.
Section 1: Introduction
Page 1-3