Cisco TelePresence MX700 and MX800
Introduction
xConfiguration Cameras SpeakerTrack ConnectorDetection Mode
Not applicable in this version.
USAGE:
xConfiguration Cameras SpeakerTrack ConnectorDetection Mode:
where
xConfiguration Cameras SpeakerTrack ConnectorDetection CameraLeft
Not applicable in this version.
USAGE:
xConfiguration Cameras SpeakerTrack ConnectorDetection CameraLeft:
where
xConfiguration Cameras SpeakerTrack ConnectorDetection CameraRight
Not applicable in this version.
USAGE:
xConfiguration Cameras SpeakerTrack ConnectorDetection CameraRight:
where
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
D15335.02
About the API
xConfiguration
xConfiguration
Mode
xCommand
xConfiguration Cameras SpeakerTrack Whiteboard Mode
This setting applies to systems with a dual camera (speaker track).
Define whether to enable the Snap to Whiteboard feature or not.
The Snap to Whiteboard feature relies on a speaker track camera. When a presenter is stand-
ing next to the whiteboard, the camera will capture both the presenter and the whiteboard if
the Snap to Whiteboard feature is enabled. If the feature is disabled, only the presenter will be
captured.
The Snap to Whiteboard feature is set up from the Touch controller.
Requires user role: USER
Default value: Off
CameraLeft
USAGE:
xConfiguration Cameras SpeakerTrack Whiteboard Mode:
where
Mode
: Off/On
Off: The Snap to Whiteboard feature is disabled.
On: The Snap to Whiteboard feature is enabled.
CameraRight
47
API Reference Guide
xStatus
Appendices
Mode
Copyright © 2016 Cisco Systems, Inc. All rights reserved.