Siemens SINUMERIK 808D ADVANCED Training Manual page 69

Series
Machine
Production
Add 4th axis
Drive optimization
The system will
automatically tune, using
the results of MA1 axis
high and low frequency
measurement as shown.
808D ADVANCED Turning and Milling
Step 2
Drive optimization
After the full optimization
testing is completed, the
system will automatically
give a list of parameters
before and after optimiza-
tion of each axis data.
Press "activate"
SK makes the
data active.
Press "Next" SK to continue
The system will
automatically be
optimized after the
machine data is written to
the NC and drives.
Once successfully saved
the system will
automatically jump to the
next step "to establish the
machine debug file"
Page 69
s
Commissioning Guide