Siemens SINUMERIK 808D ADVANCED Training Manual page 61

Series
Machine
Production
Add 4th axis
A common requirement is for a standard machine to be fitted with an
additional axis. This requirement usually arises after the machine has left
the factory. Reconfiguring the drives will result in any user settings of the
existing drives being overwritten by default data.
Set options for adding 4th axis
Step 1
When a license key is
entered, the
corresponding option is
used to activate the
function.
For more information see:
Commissioning Manual
page 94
Press button
+
.
First set the password
Press button
Press "Serv. Displ." SK
Press "Version" SK
808D ADVANCED Turning and Milling
Step 2
Press "Options" SK
Enter the number of added value needs to be activated, press "NCK Re-
set" SK
Page 61
s
Commissioning Guide