Siemens SINUMERIK 808D ADVANCED Training Manual page 55

Series
Machine
Production
Commissioning the series machine
Set SW limit
For detailed information
refer to :-
Commissioning manual
page 114
You can edit the axis machine data for the required axis.
Vertical SK's allow you to edit, activate or set as default
Used to select the axis (X or Z turn or X, Y, or Z mill)
Changes will be activated
MD set to default value
MD set to previous value
To continue press the SK
808D ADVANCED Turning and Milling
Step 1
Bcklsh comp.
For detailed information
refer to :-
Commissioning manual
page 115
You can edit the axis machine data for the required axis.
Vertical SK's allow you to edit, activate or set as default
Used to select the axis (X or Z turn or X, Y, or Z mill)
Changes will be activated
MD set to default value
MD set to previous value
Page 55
s
To continue press the SK
Commissioning Guide