Siemens SINUMERIK 808D ADVANCED Training Manual page 41

Commissioning
of Prototype
Machine using
Sample PLC
Commissioning the prototype
Drive
configuration
First drive data for each
axis will be save to the
drive.
Followed by creating the drive data
backup files for each axis.
808D ADVANCED Turning and Milling
Step 9
Set axis
parameters
For detailed information
refer to :-
Commissioning manual
page 106
The data below must be
Setting
data：
Machine Data
ABS
encoder
30130 1
30240 4
34200 0
34210 1
You can edit the axis machine data for the required axis.
Vertical SK's allow you to edit, activate or set as default value.
Used to select the axis (X or Z turning or X, Y, or Z
milling)
Changes will be activated
MD set to default value
MD set to previous value
Page 41
s
Setting
data：
INC
encoder
1
1
1
0
To continue press the SK
Commissioning Guide