Siemens SINUMERIK 808D ADVANCED Training Manual page 58

Series
Machine
Production
Commissioning the series machine
Drive optimization
Preliminary low
frequency speed
measurement takes place
with the first of two
passes.
To continue press the BUTTON
Low frequency speed
measurement takes place
with the second of two
passes.
To continue press the BUTTON
Commissioning Guide
Step 1
Drive optimization
The system will
automatically tune, using
the results of MX1 axis
high and low frequency
measurement as shown.
The axis optimization operation process will now optimise MZ1 axis of high
and low frequency measurement process. (a repeat of the 8 passes as
shown on previous page)
The system will
automatically tune, using
the results of MX1 axis
high and low frequency
measurement as shown.
Page 58
s
808D ADVANCED Turning and Milling