Siemens SINUMERIK 808D ADVANCED Training Manual page 9

Commissioning
of Prototype
Machine using
Sample PLC
Mounting dimensions
The cut-out dimensions for the 808D ADVANCED horizontal PPU and
MCP.
Cut-out dimensions
808D PPU
808D MCP
PPU = Panel Processing Unit
MCP = Machine Control Panel
808D ADVANCED Turning and Milling
Step 2
BB
X10
NC
The clamps are located at the positions indicated with the black triangles.
The black triangles can be seen in the above picture highlighted with red
circles.
Page 9
s
PPU
MCP
AA
Commissioning Guide