Siemens SINUMERIK 808D ADVANCED Training Manual page 24

Commissioning
of Prototype
Machine using
Sample PLC
Toolbox software
Testing the connection to PLC Programming Tool.
A connection must be made so that the PLC programming tool can
communicate with PPU, first startup the PLC programming tool software.
For further information refer to :-
Commissioning manual
page 210
Click the Communications
Icon.
Double click highlighted area.
Commissioning Guide
Step 4
Select the active ethernet adaptor.
Activate the PLC connection setting in 808D (password set to "sunrise")
Press key:
Press key:
Press "Serv. Displ." SK
Page 24
s
+
808D ADVANCED Turning and Milling