Siemens SINUMERIK 808D ADVANCED Training Manual page 64

Series
Machine
Production
Add 4th axis
Drive configuration
You can start the drive axis configuration by using the vertical SK.
Starts the configuring of the V70 drive.
The control will identify all
motors on the M3 Drive Bus
To continue press the SK
Commissioning Guide
Step 2
Drive configuration
All BISS motors will automatically identified.
All TTL motors will have to be configured individually.
Starts the configuration of each unidentified motor.
Page 64
s
To continue press the SK
808D ADVANCED Turning and Milling