Command Center Rx - Kyocera ECOSYS M5521cdn Operation Manual

Installing and Setting up the Machine > Command Center RX

Command Center RX

If the machine is connected to the network, you can configure various settings using Command Center RX.
This section explains how to access Command Center RX, and how to change security settings and the host name.
Command Center RX User Guide
NOTE
To fully access the features of the Command Center RX pages, enter the User Name and Password and click [Login].
Entering the predefined administrator password allows the user to access all pages, including Document Box,
Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator
privileges is shown below. (Upper case and lower case letters are distinguished (case sensitive).)
Login User Name: Admin
Login Password: Admin
Settings that the administrator and general users can configure in Command Center RX are as follows.
Setting
Device The machine's structure can be checked.
Information
Job Status Displays all device information, including print and scan jobs, storing jobs,
scheduled jobs, and job log history.
*1
Document Box Configures settings related to the Job Box.
Address Book Create, edit, or delete addresses and address groups.
Device Settings Configure the advanced settings of the machine.
Function Settings Configure the advanced function settings.
Network Settings Configure the network advanced settings.
Security Settings Configure the security advanced settings.
Management Configure the advanced management settings.
Settings
*1 The expansion memory or SD/SDHC memory card is required.
*2 The logged in user may not be able to configure some settings, depending on the permissions of the user.
NOTE
Here, information on the FAX settings has been omitted.
FAX Operation Guide
Description
2-45
Administ- General
rator User
-
*2
-
-
-
-
-