Kyocera ECOSYS M5521cdn Operation Manual page 254

Setup and Registration (System Menu) > System Menu
Item
IPP Over SSL
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
HTTP
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
HTTPS
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
LDAP
ThinPrint
Thin Print over SSL
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
Select whether or not to use IPP over SSL.
Value: Off, On (Port Number: 1 to 32767)
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [IPP Over SSL] is set to [On].
Select whether to communicate using HTTP.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [HTTP] is set to [On].
Select whether to communicate using HTTPS.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [HTTPS] is set to [On].
Select whether to use LDAP.
Value: Off, On
Select whether to use ThinPrint. To use the Thin Print protocol, set the protocol to [On]. The
default port number is 4000.
Value: Off, On (Port Number: 1 to 32767)
NOTE
This function is displayed only when the optional ThinPrint Option is activated.
To use the Thin Print over SSL protocol, set [Thin Print Over SSL] to [On].
Value: Off, On
NOTE
• This function is displayed when [ThinPrint] is set to [On].
• When selecting [On], it also requires a certificate for SSL. The default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [ThinPrint] is set to [On].
8-14
Description
*1, *3
*1
*1, *3
*1, *3
*1, *3