Send - Kyocera ECOSYS M5521cdn Operation Manual

Setup and Registration (System Menu) > System Menu

Send

[System Menu/Counter] key > [▲] [▼] key > [Send] > [OK] key
Configures settings for sending functions.
Item
Select Key Set.
DestinationCheck
Check beforeSend
Check New Dest.
New Dest. Entry
Recall Dest.
Default Screen
Send and Forward
Forward
Destination
*1 Also applies when sending the fax.
Commonly used sending functions can be registered to the Select key. Functions can be easily
configured by selecting the Select key.
Value: None, Color Selection, Original Size, Original Image, Scan Resolution,
Sending Size, Zoom, Orig. Orientation, Mixed Size Orig., Continuous Scan, File Format,
File Name Entry, Subject/Body, JobFinish Notice, FAX Resolution, FAX Direct TX,
FAX Delayed TX, FAX RX Polling, FAX TX Report, Density, FTP Encrypted TX,
File Separation, Sharpness, Contrast, Backgrnd Density, Skip Blank Page
Set the confirmation of destinations.
Select whether to display the confirmation screen of destinations after pressing the [Start] key
when performing sending jobs.
Value: Off, On
When adding new destination, select whether to display the entry check screen to check the
entered destination.
Value: Off, On
Select whether to permit direct entry of destination.
Value: Permit, Prohibit
Select whether to permit usage of [Recall] on the Send screen.
Value: Permit, Prohibit
Use this procedure to set the default screen displayed when you select the [Send] key.
Value: Destination, Address Book
Set whether to send the original to another destination and store it when sending images.
Set the rule to send the original.
Value: Off, On
NOTE
When selecting [On], select rules to forward from [E-mail], [Folder (SMB)], [Folder (FTP)] and
[FAX].
Set the destination to which the original is forwarded. One destination can be set. You can
check and edit the set address.
Follow the steps below to register the destination.
• Address Book
• Address Entry
Specifying Destination (page 5-28)
8-35
Description
*1
*1
*1