Kyocera ECOSYS M5521cdn Operation Manual page 338

Troubleshooting > Troubleshooting
Message
Paper jammed in
document processor.
Paper jammed in Rear
cover #.
Polling box limit
exceeded. Job is
canceled.
Printing multiple copies
is not allowed.
R
Message
RAM disk error. Press
[OK].
Removable Memory is
full. Job is canceled.
Remove original from
document processor.
Replace all originals and
press Start key.
Checkpoints
―
―
Is [OK] displayed on the screen?
—
Checkpoints
―
―
*1
Are there any originals left in the
document processor?
―
Corrective Actions
A paper jam has occurred in the
document processor. Leave the
machine on and select [Help] on the
screen, and follow the instruction to
remove the jammed paper.
If a paper jam occurs, the machine
will stop and the location of the jam
will be indicated on the screen.
Leave the machine on and select
[Help] on the screen, and follow the
instruction to remove the jammed
paper.
The specified box is full, and no
further storage is available; Job is
canceled. Select the [OK] key. Try
to perform the job again after
printing or deleting data from the
box.
Only one copy is available. Select
[Continue] to continue printing.
Select [Cancel] to cancel the job.
Corrective Actions
An error has occurred on the RAM
disk. Job is canceled. Select the
[OK] key.
The possible error codes and their
descriptions are as follows.
The error cord is as follows.
04: Insufficient space on the RAM
disk. If the optional RAM dis is
installed, increase the RAM Disk
Size by changing RAM Disk Mode
in System Menu.
NOTE
The range of RAM disk size can be
increased by selecting [Printer
Priority] in Optional Memory.
Job is canceled. Select [End].
Insufficient free space in the
removable memory. Delete
unneeded files.
Remove originals from the
document processor.
Remove originals from the
document processor, put them back
in their original order, and place
them again. Select [Cancel] to
cancel the job.
10-21
Reference
Page
page 10-42
page 10-39
FAX
Operation
Guide
—
Reference
Page
page 8-30
―
page 10-42
―