Kyocera ECOSYS M5521cdn Operation Manual page 253

Setup and Registration (System Menu) > System Menu
Item
SMB
SNMP
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
SMTP
POP3
RAW Port
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
LPD
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
IPP
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
Select whether to send documents using SMB. When selecting [On], set the SMB default Port
Number. The default port number is 445.
Value: Off, On (Port Number: 1 to 65535)
Select whether to communicate using SNMP.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [SNMP] is set to [On].
Select whether to send E-mail using SMTP.
Value: Off, On
Select whether to receive E-mail using POP3.
Value: Off, On
Select whether to receive documents using Raw Port.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [RAW Port] is set to [On].
Selects whether to receive documents using LPD.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [LPD] is set to [On].
Selects whether to receive documents using IPP. To use the IPP protocol, select [Not Secure
(IPP&IPPS)] on IPP Security under Security Settings from the Command Center RX. The
default port number is 631.
Value: Off, On (Port Number: 1 to 32767)
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [IPP] is set to [On].
8-13
Description
*1
*1
*1
*1