Sending Document Via E-Mail; Configuring Settings Before Sending; Sending Scanned Document Via E-Mail - Kyocera ECOSYS M5521cdn Operation Manual

Operation on the Machine > Sending Document via E-mail

Sending Document via E-mail

When transmitting using wireless LAN, select the interface dedicated to the send function in advance.
Primary Network (page 8-16)

Configuring Settings before Sending

Before sending an E-mail, configure the SMTP and E-mail settings using the Command Center RX.
E-mail Settings (page 2-51)

Sending Scanned Document via E-mail

1
2
3
4
5
6
Select the [Send] key.
Place the originals.
Loading Originals (page 5-2)
[▲] [▼] key > [E-mail] > [OK] key
Enter destination E-mail address > [OK] key
Up to 128 characters can be entered.
Character Entry Method (page 11-8)
To enter multiple destinations, select [Confirm/Add Destination] key and enter the next
destination. Up to 100 E-mail addresses can be specified.
Destinations can be changed later.
Confirmation Screen of Destinations (page 5-32)
Select the functions.
Select the [Function Menu] key to select the send functions to use.
Send (page 6-4)
Press the [Start] key.
Sending starts.
5-15