Kyocera ECOSYS M5521cdn Operation Manual page 131

Preparation before Use > Registering Destinations in the Address Book
4
The Folder (FTP) Address
1
[◄] [►] key > [Folder (FTP)] > [Edit]
2
Enter the information for "Host Name (FTP)", "Path", "Login User Name" and "Login
Password" > [OK] key
The table below explains the items to be entered.
Item
*1
Host Name (FTP) Host name or IP address of FTP server
*2
Path Path for the file to be stored
For example: User\ScanData
If no path is entered, the file is stored in the home directory.
Login User Name FTP server login user name
Login Password FTP server login password
*1 If you specify a port number other than the default (21), use the "Host name: port number" (Example:
FTPhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
*2 When the FTP server is based on Linux/UNIX, the path including the sub-folder is combined by the
slash "/" not using the back-slash.
NOTE
Refer to the following for details on entering characters.
Character Entry Method (page 11-8)
3
The connection confirmation screen appears. Select [Yes] to check the connection and
[No] to not check it.
If [SSL] is enabled in [Secure Settings], "Connect with encrypt communication?" will appear after
you select [Yes]. If [Yes] is selected, the FTP encrypted communication connection will be confirmed.
If [No] is selected, you will return to the regular connection confirmation screen.
"Connected." appears when connection to the destination is correctly established. If "Cannot
connect." appears, review the entry.
Specify the address number.
1
[◄] [►] key > [Address Number] > [Edit]
2
Enter an address number.
NOTE
You can set any value between 1 and 120.
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Address Number is an ID for a destination. You can select any available number.
If you specify an address number that is already in use, an error message appears when
you select the [OK] key and the number cannot be registered.
3
Select the [OK] key.
Descriptions
3-22
Max. No. of
Characters
Up to
64 characters
Up to
128 characters
Up to
64 characters
Up to
64 characters