Glossary Of Terms - Danfoss AK-SM 850 User Manual

NOTES

Glossary of terms

RMT
Viz
System View
Site View
AK I/O:
Bd-Pt:
Alarm Levels:
MAI
CSI
FAI
IP
EDF
CAT (seen in EDF list)
Relative schedule
Communications
Danfoss
Veris Industries™
Carlo Gavazzi™
Continental Control Systems™
72
Remote Management Tool
Visual file. Used in the RMT tool and sent to the AK-SM for graphic Site View
Central page of AK-SM that displays all configured control points
Custom graphic page with mapped system parameters
Danfoss AK Input / Output modules
Board & Point address location
Disabled = no alarm action
Log Only = logs alarm in database - no external action
Normal = Activate alarm output (once)
Severe = Activate alarm output (repeat based on severe repeat time)
Critical = Activate alarm output (repeat based on critical repeat time)
Master Application Image
Compressed Software Image
Factory Application Image
Internet Protocol
Extended Device File (a file that represents the physical device)
Category (1=Evap, 2=Pack, 8=HVAC, 16=Energy meter, 34=AKD102)
When set a relative schedule will offset against the operating hours (set under config/time)Host
The connection (via Ethernet) of one or more AK-SM units. The connection between units is
known as 'host network'
http://danfoss.com
http://www.veris.com/
http://www.carlogavazzi.com/
http://www.ccontrolsys.com/w/Home
User Guide USCO.PI.R1.E1.02 © Danfoss 07-2013
Lit. no.
AK-SM 850