Danfoss AK-SM 850 User Manual page 23

Connections screen - Define the number of connections, then
select the connection type. Your AK-SM can offer the following
alarm IP based alarm output;
e-mail, Remote (Danfoss Electronic delivered services) and XML.
Depending on your configuration the screen will reflect the
required inputs in order to satisfy the output. In order for any
alarms to be routed out of your AK-SM please ensure a schedule is
configured. Failure to set a schedule will inhibit any alarm output.
Example of e-mail configuration
AK-SM 850 User Guide USCO.PI.R1.E1.02 © Danfoss 07-2013
Lit. no.
To configure a netwrok connection select
'Number of network connections'
Type (e-mail | Remote | XML)
Ensure a schedule is defined to allow alarm
ouput
Enter valid server name (or IP) for e-mail server
If your e-mail service requires user authoriza-
tion, enter user name and password
Send to: Add the e-mail address for intended
recipients
Reply to: A mandatory field that must
have a valid entry (address with same domain
name). An abbreviated message would have
reduced text in the alarm message
Configure a schedule to enable the alarm
e-mail output
3G Wireless routers
3G technology offers many benefits over standard dial up
connections. Utilizing a 3G connection the full range of AK-SM
services can be used, including web browser, and RMT. Where
Internet / Intranet connection is not available, Danfoss recom-
mends considering 3G as a means of offering IP connectivity.
Please consult your local Danfoss sales office with regard to 3G
connectivity.
23