Initial Configuration - Language - Danfoss AK-SM 850 User Manual

Initial Configuration - language

The following section describes the recommended actions
to get your AK-SM up and running.
Local keypad - button layout
Escape
Setting language for local SM display
Your AK-SM can display several different languages. The
factory default the unit will display English, in addition your
required language can also be enabled. Follow the simple
steps below to display your preferred language in the local
screen;
1/ Press the Configuration button, and if required enter the
factory default user name and password (Supervisor, 12345)
2/ Using the arrow keys, navigate to the 'System' memu.
3/ Using the down arrow, navigate to the Language line and
select your required language
4/ Select your language for 'Display'. The unit will then request
a reset.
AK-SM 850
Home
Menu
(System View)
Back Shift
Previous
Page Up
Next
Page Down
User Guide USCO.PI.R1.E1.02 © Danfoss 07-2013
Lit. no.
Alarms Configuration
Menu Navigation
Select language
Numeric keypad
Display language
13