Verifying Orbem Parameters; Snmp Mib Browser - Cisco ASR 5000 Administration Manual

Management Settings

Verifying ORBEM Parameters

Step 1 Run the show orbem client table command to verify that the client was configured properly. This command lists the
configured ORBEM clients and displays their state and privileges.
Step 2 Run the show orbem status command to verify the ORBEM parameter configuration. The following displays a sample
of this command's output.
Service State
Management Functions
IOP Address
SSL Port
TCP Port
Notification SSL Port
Notification TCP Port
Session Timeout
Max Login Attempts
IIOP Transport
Notification
Debug Level
IDL Version Check
Number of Current Sessions
Number of Event Channels Open
Number of Operations Completed
Number of Events Processed
Avg Operation Processing time

SNMP MIB Browser

This section provides instructions to access the latest Cisco Starent MIB files using a MIB Browser. An
updated MIB file accompanies every StarOS release. For assistance to set up an account and access files,
please contact your Cisco sales or service representative for additional information.
A MIB Browser allows the user to pull out data from SNMP enabled devices. You can load standard and
propriety MIBs. The tool allows the user to see the MIB data in a readable format and also offers the ability
to search for a specific OID. The Browser displays all of the MIBs in a MIB tree which makes it easy to find
and identify all Objects, Traps or Conformances.
: On
: FCAPS
: 192.168.1.150
: 14131
: 14132
: 7777
: 7778
: 86400 secs
: 5
: On
: On
: Off
: On
: 1
: 0
: 2895
: 0
: 87214 usecs
(last 1000) : 87950 usecs
ASR 5000 System Administration Guide, StarOS Release 21.1
Verifying ORBEM Parameters
89