Management Settings; Orbem - Cisco ASR 5000 Administration Manual

Management Settings

This chapter provides instructions for configuring Object Request Broker Element Management (ORBEM)
and Simple Network Management Protocol (SNMP) options.
This chapter includes the following sections:
•
•
•

ORBEM

The system can be managed by a Common Object Broker Request Architecture (CORBA)-based, Element
Management System (EMS).
You must configure the ORBEM settings on the ASR 5x00 that allow the system to communicate with the
server running the EMS application.
Important
To configure the system to communicate with an EMS:
Step 1 Set client ID parameters and configure the STOP/TCP port settings by applying the example configuration in
ORBEM Client and Port Parameters, on page 88
Step 2 Configure Internet Inter-ORB Protocol (IIOP) transport parameters by applying the example configuration in
IIOP Transport Parameters, on page 88
Step 3 View your new ORBEM configuration by following the steps in
Step 4 Save the configuration as described in Verifying and Saving Your Configuration.
ORBEM, page 87
SNMP MIB Browser, page 89
SNMP Support, page 92
Commands used in the configuration samples in this section provide base functionality. The most common
commands and keyword options are presented. In many cases, other optional commands and keyword
options are available. Refer to the Command Line Interface Reference for detailed information about all
commands.
C H A P T E R
Verifying ORBEM Parameters, on page 89
ASR 5000 System Administration Guide, StarOS Release 21.1
5
Configuring
Configuring
87