System Settings - Cisco ASR 5000 Administration Manual

System Settings

It is assumed that the procedures to initially configure the system as described in Getting Started have been
completed.
Important The commands used in the configuration examples in this section are the most likely-used commands
and/or keyword options. In many cases, other optional commands and/or keyword options are available.
Refer to the Command Line Interface Reference for complete information.
• Configuring a Second Management Interface, page 38
• Verifying and Saving Your Interface and Port Configuration, page 38
• Configuring System Timing, page 39
• Configuring Transmit Timing Source, page 43
• Enabling CLI Timestamping, page 45
• Configuring CLI Confirmation Prompts , page 45
• Configuring System Administrative Users, page 47
• Configuring TACACS+ for System Administrative Users, page 54
• Separating Authentication Methods, page 58
• Configuring a Chassis Key, page 61
• Configuring Virtual MAC Addresses, page 63
• Verifying Virtual MAC Address Configuration, page 64
• Configuring Packet Processing and Line Card Availability, page 64
• Configuring Line Card and SPIO Port Redundancy, page 65
• Configuring ASR 5000 Link Aggregation, page 70
• Configuring a Demux Card, page 79
• Configuring Flow Control on XGLCs, page 79
C H A P T E R
ASR 5000 System Administration Guide, StarOS Release 21.1
3
37