Ggsn Category; Sess_Uchkpt_Cmd_Ggsn_Delete_Sub_Sess; Sess_Uchkpt_Cmd_Ggsn_Update_Rpr; Sess_Uchkpt_Cmd_Ggsn_Update_Session - Cisco ASR 5000 Administration Manual

GGSN Category

GGSN Category

SESS_UCHKPT_CMD_GGSN_DELETE_SUB_SESS

This micro-checkpoint sends an update when a secondary bearer is deleted.
• Time based: No
• Frequency: N/A
• Event based: Yes
• Events: Occurs upon secondary bearer deletion
• Accounting: —
• Delta/Cumulative: —
• CMD-ID: 117
• Related CLI command: None

SESS_UCHKPT_CMD_GGSN_UPDATE_RPR

If RPR (Resilient Packet Ring) is configured in the GGSN service, an RPR timer is started during secondary
bearer creation. This checkpoint is sent upon expiry of this timer.
• Time based: Yes
• Frequency: RPR timer
• Event based: Yes
• Events: Occurs when the secondary bearer creation RPR timer expires.
• Accounting: —
• Delta/Cumulative: —
• CMD-ID: 118
• Related CLI command: —

SESS_UCHKPT_CMD_GGSN_UPDATE_SESSION

This micro-checkpoint is sent in a Network or UE initiated update procedure except for updates that result in
the following scenarios:
• Creation or deletion of the beare
• TFT change or inter-RAT handovers
• Gn-Gp handoff
Parameters associated with this micro-checkpoint are shown below.
ASR 5000 System Administration Guide, StarOS Release 21.1
410
ICSR Checkpointing