Sess_Uchkpt_Cmd_Samog_Gtpv1_Update_Pdn_Info; Sess_Uchkpt_Cmd_Samog_Handoff_Authen_Info; Sess_Uchkpt_Cmd_Samog_Handoff_Init_Info - Cisco ASR 5000 Administration Manual

SaMOG Category

SESS_UCHKPT_CMD_SAMOG_GTPV1_UPDATE_PDN_INFO

This micro-checkpoint is sent for a SaMOG session upon receipt of an Update-PDP-Context-Req from the
GGSN to update the PDN information.
• Time based: No
• Frequency: N/A
• Event based: Yes
• Events: Occurs after successful SaMOG processing of an Update-PDP-Context-Req from the GGSN.
• Accounting: No
• Delta/Cumulative: N/A
• CMD-ID: 191
• Related CLI command: show subscriber samog-only full

SESS_UCHKPT_CMD_SAMOG_HANDOFF_AUTHEN_INFO

This micro-checkpoint is sent for a SaMOG session that is Re-authenticating the subscriber while the subscriber
session is in Handoff state.
• Time based: No
• Frequency: N/A
• Event based: Yes
• Events: Occurs on completion of Re-Authentication for an existing SaMOG subscriber session currently
in Handoff state.
• Accounting: No
• Delta/Cumulative: N/A
• CMD-ID: 176
• Related CLI command: show subscriber samog-only full

SESS_UCHKPT_CMD_SAMOG_HANDOFF_INIT_INFO

This micro-checkpoint is sent for a SaMOG session on receipt of an Accounting Req (STOP) from the WLC
(Wireless LAN Controller).
SaMOG will delay handoff as it expects an Accounting Req (START) from the subscriber.
• Time based: No
• Frequency: N/A
• Event based: Yes
• Events: Occurs when a Account Req (STOP) request is received from the WLC.
ASR 5000 System Administration Guide, StarOS Release 21.1
422
ICSR Checkpointing