Saving the Configuration
The -redundant keyword is only applicable when saving a configuration file to a local device (pcmcia1)
Important
that is installed on both SMCs. This command does not synchronize the local file system. If you have
added, modified, or deleted other files or directories to or from a local device for the active SMC, you
must synchronize the local file system on both SMCs. See
To save a configuration file called system.cfg to a directory that was previously created called cfgfiles on the
CompactFlash in the SMC, enter the following command:
save configuration /flash/cfgfiles/system.cfg
ASR 5000 System Administration Guide, StarOS Release 21.1
98
Verifying and Saving Your Configuration
Synchronizing File Systems, on page 97