Configuring Context-Level Operators; Configuring Context-Level Inspectors - Cisco ASR 5000 Administration Manual

System Settings

Configuring Context-level Operators

Use the example below to configure context-level operators:
configure
context local
operator user_name { [ encrypted ] [ nopassword ] password password }
end
Notes:
• Additional keyword options are available that identify active administrators or place time thresholds on
the administrator. Refer to the Command Line Interface Reference for more information about the
operator command.
• The nopassword option allows you to create an operator without an associated password. Enable this
option when using ssh public keys (authorized key command in SSH Configuration mode) as a sole
means of authentication. When enabled this option prevents someone from using an operator password
to gain access to the user account.
Save the configuration as described in the Verifying and Saving Your Configuration chapter.

Configuring Context-level Inspectors

Use the example below to configure context-level inspectors:
configure
context local
inspector user_name { [ encrypted ] [ nopassword ] password password }
end
Notes:
• Additional keyword options are available that identify active administrators or place time thresholds on
the administrator. Refer to the Command Line Interface Reference for more information about the
inspector command.
• The nopassword option allows you to create an inspector without an associated password. Enable this
option when using ssh public keys (authorized key command in SSH Configuration mode) as a sole
means of authentication. When enabled this option prevents someone from using an inspector password
to gain access to the user account.
Save the configuration as described in the Verifying and Saving Your Configuration chapter.
Configuring Context-level Administrative Users
ASR 5000 System Administration Guide, StarOS Release 21.1
49