Asr 5000 System Administration Guide, Staros Release 21.1 - Cisco ASR 5000 Administration Manual

Monitoring ASR 5000 Hardware Status
Table 8: Hardware Monitoring Commands
To do this:
View the Status of the Power System
View the status of the PFUs
View the power status of the individual chassis slots
View the Status of the Fan Trays
View the status of the fan trays, including current relative speeds and
temperatures.
Determine the Status of Installed Cards
View a listing of installed application cards
View a listing of installed line cards
View Line Card-to-Application Card Mappings
View line card-to-application card mappings
Perform a Hardware Inventory
View all cards installed in the chassis and their hardware revision,
part, serial, assembly, and fabrication numbers
View all cards installed in the chassis and their hardware revision,
and the firmware version of the on-board Field Programmable Gate
Array (FPGAs)
View details of a specific card. Output contains same information as
output of both show hardware inventory and show hardware version
board
View Card Diagnostics
View boot, power and temperature diagnostics
View temperature diagnostics
View runtime, or real time, information
View the LED Status of All Installed Cards
Refer to the descriptions of card-level and system-level LEDs in the ASR 5000 Installation Guide for detailed information.
Note
View the LED status for all installed cards
View Available Physical Ports
View ports that are available to the system
View detailed information for a specific port
View CPU Resource Information

ASR 5000 System Administration Guide, StarOS Release 21.1

154
Enter this command:
show power chassis
show power all
show fans
show card table
show linecard table
show card mappings
show hardware inventory
show hardware version board
show hardware card slot_number
show maximum-temperature; show card diag slot_number
show temperature
show card info slot_number
show leds all
show port table
show port info slot_number/port_number
Monitoring the System