Table of Contents
Advertisement
Westland Lysander
Horizontal
Stabilizer.
ELEVATOR PUSHROD HORN
INSTALLATION.
1) Locate items necessary to install rud-
der pushrod.
2) Install the elevator control horn using
the same method as with the aileron con-
trol horns.
3) Position the elevator control horn on
the both side of elevator.
18
3x12mm
Vertical
Stabilizer.
90º
Elevator control horn.
3) Thread one clevis and M3 lock nut on
to each elevator control rod. Thread the
horns on until they are flush with the
ends of the control rods.
4) Elevator and rudder pushrods assem-
bly as pictures below.
150mm
M3 lock nut.
M3 clevis.
Instruction Manual.
18
Advertisement
Table of Contents
