Table of Contents
Advertisement
Westland Lysander
INSTALLING THE AILERON SERVOS.
Servos
Because the size of servos differ, you
may need to adjust the size of the precut
opening in the mount. The notch in the
sides of the mount allow the servo lead to
pass through.
1) Using a small weight (Weighted fuel
pick-up works well) and string, feed the
string through the wing as indicated.
12
Small weight
.
.
Thread
2) Place the servo between the mounting
blocks and space it from the hatch. Use a
pencil to mark the mounting hole loca-
tions on the blocks.
3) Use drill bit in a pin vise to drill the
mouting holes in the blocks.
4) Apply 2-3 drops of thin C/A to each
of the mounting holes. Allow the C/A to
cure without using accelerator.
5) Use dental floss to secure the connec-
tion so they cannot become unplugged.
Instruction Manual.
C/A glue
12
Advertisement
Table of Contents
