Automation Modes Menu; Edit Tools Menu; Edit Modes Menu; Status/Group Menu - Solid State Logic AWS 900+ SE Owner's Manual

2. Automation Modes
Automation Modes (AuMo) sets the update mode for each channel or group of channels. See page 5-22 for more
details.

3. Edit Tools Menu

Edit Tools (EdTs) displays a list of available tools used by your DAW system. For example, in Pro Tools you can
select the Zoom, Trim, Select, Grabber, Smart Tool, Scrub and Pencil tools.

4. Edit Modes Menu

Edit Modes(EdMo) displays a list of available edit modes used by your DAW system. Within Pro tools® you can
select Shuffle, Slip, Spot and Grid modes.

5. Status/Group Menu

The Status/Group (StGr) menu contains several useful functions including:
Auto – Shows the Automation status of all channel faders on the channel fader scribble strips.
Monitor – Shows the monitor status of all 24 focused channels on the fader scribble strip. The labelling is as follows:
Auto input mode
Auto
Input mode only
Inpt
Auxiliary input channel
Aux
MIDI channel
MIDI
Master Fader
Mstr
Phase – Not implemented
Group – Shows the grouping status of all 24 focused channels on the console.
Create – To create a fader group for your DAW, select SEL mode on the Master Control Panel then hold down the
SHIFT button and press the SEL buttons on any channels you wish to group. Finally press the CREATE button
and a new group will be created.
Suspend – Fader/Mix groups can be suspended at any time by selecting SUSPEND; they are now disengaged
from their respective grouping arrangements. Pressing SUSPEND a second time re-enables the groups.
Pro Tools HUI Control Guide
AWS 900+ SE Owner's Manual
5-21