Preferences/Control Surfaces Setup Menu - Solid State Logic AWS 900+ SE Owner's Manual

Installation
Note: Logic's Click and ports environment layer selects the SUM of all of the ipMIDI unput ports as its default MCU
control data source. This may lead to difficulties when using multiple DAW layers. To avoid Logic responding to
MIDI messages intended for the other DAW layer, the Click and Port MIDI port mapping should be changed from
SUM to individual direct MIDI port assignment. The example below shows Logic on DAW layer 1:

Preferences/Control Surfaces Setup menu:

If you have AWSomation, set the MMC midi port in File/Project Settings/Synchronisation/MIDI to ipMIDI port 7 (or
AWS MIDI port 4 if you are using the console MIDI ports):
For other DAWs, please refer to the program's manual for details about configuring MIDI controllers.
AWS 900+ SE Owner's Manual
3-18