Direct Network Connection (Pc) - Solid State Logic AWS 900+ SE Owner's Manual

Direct Network connection (PC):

• Double click on Network Connections in Start/Control Panel. Right click on the network adapter connected
to your AWS (likely to be called "Local Area Connection"). Select Properties.
• Select Internet Protocol (TCP/IP) and Properties.
• Next, configure the adapter as shown below:
Click on OK on both windows to save. Back in your network connection list, right click on your adaptor and ensure
that it is enabled. If it is disabled, the enable option will appear in the list. Click on enable.
AWS 900+ SE Owner's Manual
Installation
3-13