Aws 900+ Se Owner's Manual; Soft Key Display; Automation Enables Menu; Timecode/Bars & Beats/Samples Display - Solid State Logic AWS 900+ SE Owner's Manual

DAW Control Guide
Timecode/Bars & Beats/Samples Display
The on-screen time readout can be assigned to display either Timecode (SMPTE/EBU), Feet/Frames, Bars/Beats
or samples. This display will follow the setting selection made within your DAW. Please refer to your DAW manual
for further details.
DAW Status Display
To the left of the timecode display is the DAW status display. This shows the following flags:
Solo
Loop
QPunch
Pre
Post
Solo
Audition

Soft Key Display

The Plug-In Editor includes an 8x8 matrix of soft buttons which map to the 16 boxes at the bottom of the plug-in
display:
The top row (buttons 1-8) allow selection of the labelled function. Once pressed, a sub-menu will appear for the
second row of soft key buttons (9-16). The menus are ordered as follows:
1. Automation Enables
Automation Enable modes (AuEn) globally engage or disengage automation for the following items: Faders,
Pans, Plug-Ins, Mutes (cuts), Sends and Send Muting. See page 5-22 for more details.
5-20

AWS 900+ SE Owner's Manual

DAW has a Solo active
DAW has Loop enabled
DAW has QuickPunch selected
DAW transport has pre-roll enabled
DAW transport has post-roll enabled
DAW has a Solo active
DAW is in Audition mode. This is displayed in place of the Pre and Post flags