About Msm765Zl Ports - HP ProCurve MSM765zl Installation And Getting Started Manual
Mobility controller
Hide thumbs
Also See for ProCurve MSM765zl:
- Reference manual (244 pages) ,
- Installation manual (25 pages) ,
- Datasheet (16 pages)
Table of Contents
Advertisement
Getting Started
Configure the Controller
2-6
About MSM765zl Ports
The MSM765zl features two ports, Internet and LAN. These ports do not have
RJ-45 Ethernet jacks. Instead, these ports connect through the switch
backplane and are mapped to specific RJ-45 jacks on an Ethernet module by
VLAN configuration in the switch. The switch references the Internet and LAN
ports according to the switch slot in which the MSM765zl is installed. For
example, if the MSM765zl is installed in slot C, the first port (C1) corresponds
to the Internet port, and the second port (C2) corresponds to the LAN port.
Define and Assign VLANs
1.
At the switch CLI prompt, enter:
menu
2.
Press Enter. Select Switch Configuration.
3.
From the Switch Configuration menu, select VLAN Menu:
Hide quick links:
Advertisement
Table of Contents
