Verify Switch Software Version - HP ProCurve MSM765zl Installation And Getting Started Manual

Getting Started
Configure the Controller
2-2
3. Open a terminal session with the switch and press Enter several times
until the welcome screen appears. (A different screen may appear if
another session was already open.)
4. Press any key to continue. The switch CLI prompt appears. It looks similar
to this:
ProCurve Switch 5406zl#
5. If instead, the switch menu is shown, return to the top-level menu and
then exit to the CLI by choosing Command Line (CLI) on the Main
Menu.
The switch CLI prompt appears.

Verify Switch Software Version

Before configuring the MSM765zl, verify that the switch software version is
compatible with the MSM765zl which requires at least version K.13.51 on the
switch.