Install The Product License Key; Configure The Switch For The Msm765Zl - HP ProCurve MSM765zl Installation And Getting Started Manual

Install the Product License Key

The starting point for this procedure is the Service OS CLI prompt for the
MSM765zl you are activating. If you do not have this prompt available, follow
the directions in "Obtain the Activation Hardware ID" on page
1. Install the product license key:
licenses install activation <license key>
Where <license key> is the product license key just provided by the My
ProCurve portal. The key must be entered precisely as received including
the dashes. If possible, copy and paste the string as received. For example:
2. Boot the MSM765zl product:
boot product
The boot image is verified.
3. At prompt:
System will be rebooted.Do you want to continue [y/n]?
Respond with "y".
The product reboots.
For example:

Configure the Switch for the MSM765zl

The switch must be configured to work properly with the MSM765zl.
This procedure assumes that there are Ethernet port modules installed in slot
A, and that the MSM765zl is installed in slot C. Sample VLAN IDs and names
are used. You will need to adjust the procedure according to slots chosen and
VLAN IDs and names used.
Getting Started
Configure the Controller
2-3.
2-5