Additional Documentation; Restarting And Resetting The Msm765Zl; Restarting The Msm765Zl - HP ProCurve MSM765zl Installation And Getting Started Manual

18. Assuming that the Internet port (MSM765zl_Int VLAN) has a connection
to the Internet, you can test the connection with the management tool
Tools > Ping command. Ping a site that is known to permit ping.

Additional Documentation

For detailed information on managing and configuring the MSM765zl, see the
MSM7xx Controllers Management and Configuration Guide.
The latest version of this and all HP ProCurve Networking documentation is
available at: www.procurve.com/customercare/support/manuals/index.htm.

Restarting and Resetting the MSM765zl

Restarting the MSM765zl

It is recommended that you use the management tool to restart an MSM765zl.
In the management tool, select Services Controller >> Maintenance >
System > Restart.
Alternatively, the switch CLI can be used:
1. Enter the switch CLI configuration context:
config
2. Initiate an MSM765zl restart:
services <slot-id> reload
Where <slot-id> identifies the switch slot containing the MSM765zl. A
confirmation message appears. Respond with "y" to continue.
The following sample screen shows the commands from the above 2-step
procedure for an MSM765zl in slot A:
The MSM765zl can also be restarted, by shutting it down, removing, and
reinserting the module.
Getting Started
Configure the Controller
2-15