Traffic Rules Settings; Table 29: Firewall Traffic Rules; Figure 45: Traffic Rules Settings - Grandstream Networks GWN7000 User Manual

Traffic Rules Settings

GWN7000 offers the possibility to fully control incoming/outgoing traffic for different protocols in
customized scheduled times, and taking actions for specified rules such as Accept; Reject and Drop.
Following actions are available to configure Input, output and forward rules for configured protocols
•
To add new rule, Click on
•
To edit a rule, Click on
•
To delete a rule, Click on
Refer to below table for each tab, when editing or creating a traffic rule:
Name
Enabled
IP Family
Source Group
Protocol
Source IP Address
Source MAC address
.
.
.

Figure 45: Traffic Rules Settings

Table 29: Firewall Traffic Rules

Specify a name for the traffic rule.
Check to enable this rule.
Select the IP version, three options are available: IPv4, IPv6 or Any.
Select a WAN interface or a LAN group for Source Group, or select All.
Select one of the protocols from dropdown list or All, available options
are: UDP, TCP, TCP/UCP, UDP-Lite, ICMP, AH, SCTP, IGMP and All.
Set the Source IP address, it can be an IPv4 or IPv6 address.
Set the Source MAC address.
GWN7000 User Manual
P a g e | 74