Upgrading And Provisioning; Upgrading Firmware; Upgrading Via Web Gui; Table 38: Network Upgrade Configuration - Grandstream Networks GWN7000 User Manual

Upgrading Firmware

The GWN7000 can be upgraded to a new firmware version remotely or locally. This section describes how
to upgrade your GWN7000.

Upgrading via WEB GUI

The GWN7000 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the
TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP, HTTP or
HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com/BETA
192.168.5.87
The upgrading configuration can be accessed via Web GUI->Router->Maintenance->Upgrade.
Upgrade Via
Firmware Server
Check Update on Boot
Automatic Upgrade check
interval(m)
Upgrade Now
----------------------------------------------------------------------------------------------------------------------------- ---------------
Note:
Please do not interrupt or power cycle the GWN7000 during upgrading process.
----------------------------------------------------------------------------------------------------------------------------- ---------------

UPGRADING AND PROVISIONING

Table 38: Network Upgrade Configuration

Vhoose the firmware upgrade method: TFTP, HTTP or HTTPS.
Define the server path for the firmware server.
Allows the device to check if there is a firmware from the configured
firmware server at boot.
Set the value for automatic upgrade check in minutes.
Click on
device will reboot after downloading the firmware.
GWN7000 User Manual
button to begin the upgrade. Note that the
P a g e | 88