Table 18: Wi-Fi - Grandstream Networks GWN7000 User Manual

•
Wi-Fi: Please refer to the below table for Wi-Fi tab options
Enable Wi-Fi
SSID
SSID Hidden
Security Mode
Use MAC Filtering
Client Isolation

Table 18: Wi-Fi

Check to enable Wi-Fi for the network group.
Set or modify the SSID name.
Select to hide SSID.
SSID will not be visible when scanning for Wi-Fi, to connect a device to
hidden SSID, potential wireless clients will need to specify SSID name
and authentication password manually.
Set the security mode for encryption, 5 options are available:
•
WEP 64-bit: Using a static WEP key. The characters can only be
0-9 or A-F with a length of 10, or printable ASCII characters with a
length of 5.
•
WEP 128-bit: Using a static WEP key. The characters can only
be 0-9 or A-F with a length of 26, or printable ASCII characters
with a length of 13.
•
WPA/WPA2: Using "PSK" or "802.1x" as WPA Key Mode, with
"AES" or "AES/TKIP" Encryption Type.
•
WPA2: Using "PSK" or "802.1x" as WPA Key Mode, with "AES" or
"AES/TKIP" Encryption Type. Recommended configuration for
authentication.
•
Open: No password is required. Users will be connected without
authentication. Not recommended for security reasons.
Choose Blacklist/Whitelist
excluded/included from connecting to the zone's Wi-Fi. Default is
Disabled.
Client isolation feature blocks any TCP/IP connection between connected
wireless clients via GWN76xx's WiFi access point. Client isolation can be
helpful to increase security for Guest networks/Public Wi-Fi.
If enabled, the default LAN Gateway's MAC address must be specified
under Gateway MAC Address field. The clients will not be able to
discover, ping or access other wireless devices connected to GWN7000's
network groups and only access to the default gateway, which usually
means Internet access.
GWN7000 User Manual
to specify MAC addresses to be
P a g e | 38