Table 17: Basic; Figure 16: Add A New Network Group - Grandstream Networks GWN7000 User Manual

When editing or adding a new network group, following tabs will appear to configure a network group:
•
Basic: Used to name the network group, and set a VLAN ID if adding a new network group, and
addressing plans, refer to below table for each field.
Network Group Name
WAN Membership
LAN Membership

Figure 16: Add a New Network Group

Table 17: Basic

Specifies the name for the network group.
Select the WAN port membership. Or use Multi-WAN option if enabled
under Router->Port->Global Settings
Select the LAN port membership.
GWN7000 User Manual
P a g e | 36