Refer to below table for DMZ fields:
Name
Enabled
Source Group
Destination Group
Destination IP
Inter-Group Traffic Forwarding
GWN7000 offers the possibility to allow traffic between different groups and interfaces.
Users can select to edit a source group and add to it other network groups and WAN interfaces to allow
inter-group traffic between the selected members.
Click on
next to source group, and click on
click on
to remove members from selected groups as shown in below figure
Figure 42: DMZ
Table 27: DMZ
Specify a name for the DMZ entry.
Check to enable this DMZ entry.
Select the WAN interface
Select the LAN group.
Set the destination IP address.
Figure 43: Inter-group Traffic Forwarding
to add groups and interfaces to selected groups, or
GWN7000 User Manual
P a g e
|
72